2019欧美hd精品

Discharge fabric for HTHP overflow dyeing machine
1. After dyeing, turn off the steam valve first and then open the cooling water to cool down.
2. To open the cylinder head, it is necessary to show no pressure in the pressure gauge. The temperature is below 80 C, the machine stops running and the steam source is cut off, so it can be opened to avoid scald.
3. When sampling is accurate, sewage can be discharged and the effluent is clean before discharging. If you are not allowed to look up and repair, you should abide by the above safety regulations.

http://www.lindsaylov.com/